CTL Multi Blanking Line RS16×2200 Coil O.D Max. 1800 mm Medium
Gauge Coil weight 30000 kgMulti Blanking Line Introduction
Highest Production Outcome Ease of Operation and Maintenance
Working procedure: In the beginning, the coil is loaded on the coil
car by crane and brought to the uncoiler by operating the coil car.
Coil car centralizes the coil with the uncoiler mandrel and the
coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll
rotates the coil. Peeler breaks the straps and brings the pre end
upto Pinch roll. The Pinch roll drives the coil end upto the
slitter. Then its drive is disconnected. Slitter moves the slitted
strips further. Slitted strips are threaded through loop table and
drag tensioner into the recoiler drum. Recoiler winds one turn on
loose coil.
Available raw material for cut to length machine is hot rolled
steel, cold rolled steel, galvanized steel, pre-painted steel, high
tensile steel, stainless steel, aluminum, copper, alloys in cut to
length line manufacturers.
Medium Gauge Multi Blanking Line Main Technical Parameters
1. Coil properties: δs≤550MPa, δb≤600MPa
2. Coil thickness: 3mm-12mm
3. Coil width: Max. 2200mm
4. Coil I.D: 508 mm
5. Coil O.D: Max. 1800 mm
6. Coil weight: 30000 kg
7. Line speed: 0-30 m/min
8. Leveler shaft diameter: 180 mm
9. Leveler rollers quantity: 11
10. Cutting length: 800-12000 mm
11. Cutting rate: 12 pieces/min
12. Length tolerance: ±1 mm
13. Diagonal tolerance: ±2 mm
14. Straightening tolerance: ±2 mm/m2
15. Total power: about 200 KW
16. Total weight: about 70 T
RISHBIN, as one of the cut to length machine manufacturers, medium
gauge cut-to-length lines are built for speed and ease of use and
can produce higher line speeds without experiencing material
slippage. Medium gauge lines are also capable of processing surface
critical material without marking. Cut-To-Length Line and Blanking
Line will make your job easier, cut costs, and increase your
profits.
Benefits of RISHBIN Multi Blanking Line
- Minimal tooling preparations and higher productivity rates
- Energy efficient
- Reduced operating costs
- High in speed and strength
- High input and output rates
- Extreme sheet flatness due to high precision levelers
- Exact cutting accuracy
Multi Blanking Line Parameter
| Type | RS6×2000 | RS8×2000 | RS10×2200 | RS2×2200 | RS16×2200 |
Thickness Range (mm) | 1-6 | 2-8 | 2-10 | 3-12 | 4-16 |
Width Range (mm) | 2000 | 2000 | 2200 | 2200 | 2200 |
Cutting Length (mm) | 500-6000 | 600-8000 | 600-10000 | 800-12000 | 800-12000 |
Cutting Precision (mm) | ±0.5 | ±1 | ±1 | ±1 | ±1 |
| Roller Numbers | 15 | 13 | 13 | 11 | 11 |
| Roller Diameter | Ф140 | Ф155 | Ф160 | Ф180 | Ф200 |
Coil ID Linear Speed |
Ф508&610mm 0~28m/min or 0-60m/min |
Ф&610&760mm 0~28m/min or 0-60m/min |
Ф610&760mm 0~28m/min
| Ф610&760mm 0~28m/min | Ф610&760mm 0~28m/min |
