Cutting Accuracy ±0.3 Rotary Shear Cut To Length Line Sheet Stacker
Fully Automatic
Rotary Shear Cut To Length Line Introduction
This rotary shear is suitable for hot rolling carbon steel,
tinplates, stainless steel, and other metal with coated surfaces.
It is widely used in home appliances, automobiles, hardware, steel
products and other industries. This rotary shear adopts 6H leveler
to carry out continuous leveling of the panels. With two stacking
devices, this rotary shear has a high working efficiency. It is
capable of shearing 150 plates per minute, with a maximum running
speed of 80 meters per minute. With 6H leveler, the processed
plates are smooth and free of scrapes.
Rotary Shear Lines are mainly used for CR, S.S, Al material,
precision leveling and cutting products. This line special
advantage is non-stop cutting which avoid micro – indentation by
stopping to cut. It is applicable for high precision aluminum
plate, mirror S.S plate, etc., with short cutting length product.
Rotary shear Cut To Length Lines can do uncoiling, leveling,
measuring, cross-cutting to length and stacking work. It mainly
includes uncoiler, leveler, measuring encoder, shearer, conveyor,
stacker, hydraulic system, pneumatic system and electrical system,
etc., the line can make sure of accurate feeding and shearing. It
can be widely used in cold or hot rolling carbon steel, tinplate,
stainless steel and all the other kinds of metal materials with
surface coating.
- Material thickness ranging from 0, 2 mm to 3 mm.
- Maximum strip width 1800 mm
- Maximum sheet length 8000 mm
- Tensile strength 1200 N/mm2
Cut to length line is controlled by NC servo system. It has PLC
controlled the length measurement. The information of length,
shearing numbers and speed can be input to the PLC systems. When
the need shearing number is reached the line can stop
automatically. The line speed can be adjusted, It has a encoder
with high precision, and whole line can work automatically and
operate easily, smooth sheet can be made.
The flying shearing line is applied to machine cold-rolled carbon
steel, silicon steel, tinplate, stainless steel and surface-coated
metal materials.
Rotary Shear Machine-Technical Parameter
| Parameters/Model | Processing Thickness(mm) | Processing Width(mm) | Cutting Accuracy(mm) | Max. Speed
m/min | Max. Cutting (times/min) | Uncoiling Weight(ton) |
| RS-2x650 | 0.2-2 | 100-650 | ±0.3 | 80 | 150 | 5 |
| RS-2x800 | 0.2-2 | 100-800 | ±0.3 | 80 | 150 | 8 |
| RS-2x1300 | 0.3-2 | 400-1300 | ±0.3 | 80 | 150 | 15 |
| RS-2x1600 | 0.3-2 | 400-1600 | ±0.3 | 80 | 150 | 20 |
| RS-3x800 | 0.3-3 | 100-800 | ±0.3 | 70 | 150 | 8 |
| RS-3x1300 | 0.3-3 | 400-1300 | ±0.3 | 70 | 150 | 15 |
| RS-3x1600 | 0.3-3 | 400-1600 | ±0.3 | 70 | 150 | 20 |
