Rotary Shear Lines are mainly used for CR, S.S, Al material,
precision leveling and cutting products. This line special
advantage is non-stop cutting which avoid micro – indentation by
stopping to cut. It is applicable for high precision aluminum
plate, mirror S.S plate, etc., with short cutting length product.
It consists of Uncoil, Leveling and Cross Cutting metal strip as
set length and proper blanking system; Compared with stop start
shear Cut to Length line, rotary shear line can achieve cutting the
plates without stop feeding, higher speed, better accuracy and
surface protection. Every of these functions are accomplished by
our machines which are designed to cope with an impressive variety
of material features ranging.
- Material thickness ranging from 0, 2 mm to 3 mm.
- Maximum strip width 1800 mm
- Maximum sheet length 8000 mm
- Tensile strength 1200 N/mm2
Other functions are available to the customer’s needs such as Edge
Trimming, Balling or Chopping of scrap edges from strip, Paper and
Plastic Film interleaving and many more. Our CTL are designed to
comply with the highest demand in quality and production output
with care to safety for operators and ease of maintenance.
The flying shearing line is applied to machine cold-rolled carbon
steel, silicon steel, tinplate, stainless steel and surface-coated
metal materials.
Rotary Shear Cut To Length Lines main machinery:
1. Coil car
2. Decoiler
3. Peeler table
4. Precision leveler
5. Loop Bridge
6. Side Guide Roller
7. Servo feeder
8. Rotary shear Machine
9. Conveyor table
10. Stacking table
12. Lifting table
13. Hydraulic Systems
14. Pneumatic Systems
15. Electrical System PLC Control
| Parameters/Model | Processing Thickness(mm) | Processing Width(mm) | Cutting Accuracy(mm) | Max. Speed
m/min | Max. Cutting (times/min) | Uncoiling Weight(ton) |
| RS-2x650 | 0.2-2 | 100-650 | ±0.3 | 80 | 150 | 5 |
| RS-2x800 | 0.2-2 | 100-800 | ±0.3 | 80 | 150 | 8 |
| RS-2x1300 | 0.3-2 | 400-1300 | ±0.3 | 80 | 150 | 15 |
| RS-2x1600 | 0.3-2 | 400-1600 | ±0.3 | 80 | 150 | 20 |
| RS-3x800 | 0.3-3 | 100-800 | ±0.3 | 70 | 150 | 8 |
| RS-3x1300 | 0.3-3 | 400-1300 | ±0.3 | 70 | 150 | 15 |
| RS-3x1600 | 0.3-3 | 400-1600 | ±0.3 | 70 | 150 | 20 |
