12 Pieces/Min Medium Gauge Automatic Cut To Length Machines
Stainless Steel High Tensile Steel
Automatic Cut To Length Machines Introduction
RISHBIN supply full range of cut to length line machine according
to client’s special requirement by combining different component.
Every CTL line is engineered and constructed differently for
customers, it is customized designed and built, it is considered
when choosing a right CTL line about some specifics like production
capacity, running speed, material thickness and width, etc. Quality
and standard checks are strictly performed on our product before
releasing to our valued customers.
Cut To Length line is a high efficient metal processing production
line for cutting metal flat sheet from metal coils. The metal coils
unwind, leveled, cut to length and blanking.
Available raw material for cut to length machine is hot rolled
steel, cold rolled steel, galvanized steel, pre-painted steel, high
tensile steel, stainless steel, aluminum, copper, alloys in cut to
length line manufacturers.
Main Technical Parameters of Automatic Cut To Length Machines
1. Coil properties: δs≤550MPa, δb≤600MPa
2. Coil thickness: 3mm-12mm
3. Coil width: Max. 2200mm
4. Coil I.D: 508 mm
5. Coil O.D: Max. 1800 mm
6. Coil weight: 30000 kg
7. Line speed: 0-30 m/min
8. Leveler shaft diameter: 180 mm
9. Leveler rollers quantity: 11
10. Cutting length: 800-12000 mm
11. Cutting rate: 12 pieces/min
12. Length tolerance: ±1 mm
13. Diagonal tolerance: ±2 mm
14. Straightening tolerance: ±2 mm/m2
15. Total power: about 200 KW
16. Total weight: about 70 T
RISHBIN, as one of the cut to length machine manufacturers, medium
gauge cut-to-length lines are built for speed and ease of use and
can produce higher line speeds without experiencing material
slippage. Medium gauge lines are also capable of processing surface
critical material without marking. Cut-To-Length Line and Blanking
Line will make your job easier, cut costs, and increase your
profits.
The lines can be supplied with start-stop shears, flying shears or
continuous direct feed. Edge trimming may be incorporated.
Automatic Cut To Length Machines working process:
Steel coils are transferred by an entry coil car and loaded onto an
uncoiler. From uncoiler the strip proceeds through a five-high
precision leveler designed to level steel within the desired
material gauge range and yield strength. The strip then proceeds
through a squaring unit and precision roll-feed unit to the high
speed shear, where it is cut to required length. The cut sheet then
moves to float sheet stacker where it is stacked on a pallet and is
then moved onto the semiautomatic packaging line for wrapping.
Benefits of RISHBIN Automatic Cut To Length Machines
- Minimal tooling preparations and higher productivity rates
- Energy efficient
- Reduced operating costs
- High in speed and strength
- High input and output rates
- Extreme sheet flatness due to high precision levelers
- Exact cutting accuracy
Automatic Cut To Length Machines Parameter
| Type | RS6×2000 | RS8×2000 | RS10×2200 | RS2×2200 | RS16×2200 |
Thickness Range (mm) | 1-6 | 2-8 | 2-10 | 3-12 | 4-16 |
Width Range (mm) | 2000 | 2000 | 2200 | 2200 | 2200 |
Cutting Length (mm) | 500-6000 | 600-8000 | 600-10000 | 800-12000 | 800-12000 |
Cutting Precision (mm) | ±0.5 | ±1 | ±1 | ±1 | ±1 |
| Roller Numbers | 15 | 13 | 13 | 11 | 11 |
| Roller Diameter | Ф140 | Ф155 | Ф160 | Ф180 | Ф200 |
Coil ID Linear Speed |
Ф508&610mm 0~28m/min or 0-60m/min |
Ф&610&760mm 0~28m/min or 0-60m/min |
Ф610&760mm 0~28m/min
| Ф610&760mm 0~28m/min | Ф610&760mm 0~28m/min |
