Cutting Length 800 - 12000mm Heavy Gauge Automatic Cut To Length
Machines Cutting Precision ±1mm
Automatic Cut To Length Machines Introduction
Available raw material for cut to length line is hot rolled steel,
cold rolled steel, galvanized steel, pre-painted steel, high
tensile steel, stainless steel, aluminum, copper, alloys.
Cut To Length line is a high efficient metal processing production
line for cutting metal flat sheet from metal coils. The metal coils
unwind, leveled, cut to length and blanking.
RISHBIN supply full range of cut to length line China according to
client’s special requirement by combining different component.
Every CTL line is engineered and constructed differently for
customers, it is customized designed and built, it is considered
when choosing a right CTL line about some specifics like production
capacity, running speed, material thickness and width, etc. Quality
and standard checks are strictly performed on our product before
releasing to our valued customers.
Automatic Cut To Length Machines Main Technical Parameters
1. Coil properties: δs≤550MPa, δb≤600MPa
2. Coil thickness: 8mm-25mm
3. Coil width: Max. 2500mm
4. Coil I.D: 508 mm
5. Coil O.D: Max. 2500 mm
6. Coil weight: 40000 kg
7. Line speed: 0-25 m/min
8. Leveler shaft diameter: 260 mm
9. Leveler rollers quantity: 9
10. Cutting length: 800-12000 mm
11. Cutting rate: 8 pieces/min
12. Length tolerance: ±1 mm
13. Diagonal tolerance: ±2 mm
14. Straightening tolerance: ±2 mm/m2
15. Total power: about 250 KW
16. Total weight: about 80 T
The lines can be supplied with start-stop shears, flying shears.
For start stop shear, the sheet is stopped for each cut of the
shear. They can cut a variety of lengths and thicknesses. Electric
controls are used to stop the leveler drive after the required
length has been fed through the shear and to initiate shear action,
then the subsequent feeding of the sheared length to the stacker.
For flying shear, it’s a high production solution
Automatic Cut To Length Machines Working Process:
Steel coils are transferred by an entry coil car and loaded onto an
uncoiler. From uncoiler the strip proceeds through a five-high
precision leveler designed to level steel within the desired
material gauge range and yield strength. The strip then proceeds
through a squaring unit and precision roll-feed unit to the high
speed shear, where it is cut to required length. The cut sheet then
moves to float sheet stacker where it is stacked on a pallet and is
then moved onto the semiautomatic packaging line for wrapping.
Benefits of RISHBIN Automatic Cut To Length Machines
- Minimal tooling preparations and higher productivity rates
- Energy efficient
- Reduced operating costs
- High in speed and strength
- High input and output rates
- Extreme sheet flatness due to high precision levelers
- Exact cutting accuracy
Automatic Cut To Length Machines Parameter
| Type | RS20×2500 | RS25×2500 |
Thickness Range (mm) | 6-20 | 8-25 |
Width Range (mm) | 2500 | 2500 |
Cutting Length (mm) | 800-12000 | 800-12000 |
Cutting Precision (mm) | ±1 | ±1 |
| Roller Numbers | 9 | 9 |
| Roller Diameter | Ф230 | Ф260 |
Coil ID Linear Speed | Ф610&760m 0~25m/min | Ф610&760mm 0~25m/min |
